Canon PIXMA iP6000D iP6000D Diect Print Guide - Page 86

User's guide

Get Canon PIXMA iP6000D PDF manuals and user guides View all Canon PIXMA iP6000D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 86 highlights

*1To resume printing, you can press the RESUME button on the printer instead of selecting Continue. *2The waste ink absorber absorbs ink used for cleaning. Notes PictBridge or Canon Bubble Jet Direct compatible digital cameras can be connected to your printer for direct printing. This section describes errors that are indicated on Canon-brand PictBridgeor Bubble Jet Direct-compatible cameras. The error messages and operations may vary depending on the camera you are using. For errors on non-Canon PictBridge-compatible cameras, count the number of flashes the POWER lamp on the printer makes and check for the cause of the error and take the appropriate action. For details, refer to "Handling Error Messages" in the User's guide. Connecting a digital camera not compatible with PictBridge or Bubble Jet Direct makes the POWER lamp on your printer flash nine times. In such a case, unplug the cable connecting the camera to the printer, and press the RESUME button on the printer. A communication time out occurs if printing takes a long time or if it takes too much time to send data. This may stop printing. In such a case, disconnect the cable between the printer and the camera, press the RESUME button on the printer, and reconnect the cable between the printer and the camera. Then, turn the camera on, if it does not automatically turn on. If the problem is still unresolved, select some other photo and check if it can be printed or not. The print head nozzles may be clogged if printing becomes faint or colors are incorrect. See "When Printing Becomes Faint or Colors are Incorrect" on page 70. If the paper is curled or its surface is scratched during printing, make sure that you are using the correct type of paper. If this error occurs even when you are using the correct type of paper, select Thick paper in the Thick paper menu. See "If the printed surface is still scratched:" on page 80. To disconnect the cable connected between the digital camera and printer, follow the procedure below. 1. Disconnect the cable from the printer. 2. Turn off the digital camera. 3. Disconnect the cable from the digital camera. When disconnecting the cable, be sure to hold the connector by its sides. For the errors indicated on the camera and their solution, also refer to the user's manual of the camera. For other troubles on the digital camera, contact the manufacturer. 85

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
85
*1
To resume printing, you can press the RESUME
RESUME
RESUME
RESUME button on the printer instead of selecting
Continue
Continue
Continue
Continue.
*2
The waste ink absorber absorbs ink used for cleaning.
Notes
±
PictBridge or Canon Bubble Jet Direct compatible digital cameras can be
connected to your printer for direct printing.
±
This section describes errors that are indicated on Canon-brand PictBridge-
or Bubble Jet Direct-compatible cameras. The error messages and operations
may vary depending on the camera you are using.
For errors on non-Canon PictBridge-compatible cameras, count the number
of flashes the POWER
POWER
POWER
POWER lamp on the printer makes and check for the cause of
the error and take the appropriate action. For details, refer to “Handling Error
Handling Error
Handling Error
Handling Error
Messages
Messages
Messages
Messages” in the
User’s guide
.
±
Connecting a digital camera not compatible with PictBridge or Bubble Jet
Direct makes the POWER
POWER
POWER
POWER lamp on your printer flash nine times. In such a
case, unplug the cable connecting the camera to the printer, and press the
RESUME
RESUME
RESUME
RESUME button on the printer.
±
A communication time out occurs if printing takes a long time or if it takes
too much time to send data. This may stop printing. In such a case,
disconnect the cable between the printer and the camera, press the RESUME
RESUME
RESUME
RESUME
button on the printer, and reconnect the cable between the printer and the
camera. Then, turn the camera on, if it does not automatically turn on. If the
problem is still unresolved, select some other photo and check if it can be
printed or not.
±
The print head nozzles may be clogged if printing becomes faint or colors are
incorrect. See “When Printing Becomes Faint or Colors are Incorrect
When Printing Becomes Faint or Colors are Incorrect
When Printing Becomes Faint or Colors are Incorrect
When Printing Becomes Faint or Colors are Incorrect” on
page 70.
±
If the paper is curled or its surface is scratched during printing, make sure
that you are using the correct type of paper. If this error occurs even when
you are using the correct type of paper, select Thick paper
Thick paper
Thick paper
Thick paper in the Thick paper
Thick paper
Thick paper
Thick paper
menu. See “If the printed surface is still scratched:
If the printed surface is still scratched:
If the printed surface is still scratched:
If the printed surface is still scratched:” on page 80.
±
To disconnect the cable connected between the digital camera and printer,
follow the procedure below.
1. Disconnect the cable from the printer.
2. Turn off the digital camera.
3. Disconnect the cable from the digital camera.
When disconnecting the cable, be sure to hold the connector by its sides.
±
For the errors indicated on the camera and their solution, also refer to the
user’s manual of the camera. For other troubles on the digital camera,
contact the manufacturer.