Canon VB-R12VE Network Camera Operation Guide - Page 130

Note • If the preview frame (blue frame) is positioned outside the pan/tilt preview frame (red frame) you have changed, the camera position is moved inside the restricted view. R1x M50 • If you change the position of the wide-angle/telephoto preview frame, the wide-angle/telephoto end of the preview frame is also changed. 3 Click [Apply]. The settings are saved to the camera. Important R1x M50 The panorama screen may vary from the actual image. After you have configured view restrictions, be sure to use the Camera Viewer to confirm the changes have been reflected correctly. View restrictions are not applied to the video display area of the restrict view setting. Note R1x M50 • The controllable range and range that can be captured are as follows. Tilt Control Range Maximum Vertical Capture Range Maximum Wide-angle Viewing Angle Pan Control Range Maximum Horizontal Capture Range • The pan and tilt ranges vary depending on the zoom ratio (view angle). Setting view restrictions automatically restricts the camera operating angle. When using wide-angle, the camera operating angle would allow capture outside the view restrictions if the angle remained the same. Therefore, it is narrowed automatically. Camera Restricted view angle Camera operating angle Captured video range • If the view restriction will be exceeded as a result of zooming toward wide-angle, the camera will first pan and tilt to a position where the maximum wide-angle zoom will be within the viewing restriction area. Wide-angle zoom control will then be enabled within the view restriction area. Captured video First, the center of the maximum wide-angle zoom is panned and tilted. After panning and tilting, wide-angle zoom control is enabled within the view restriction. Restricted view angle Zoom out Zoom out • Narrowing the view restriction may also reduce the zoom range. 130