Canon VB-R12VE Network Camera Operation Guide - Page 221
Restore Default, Administrator Name
![]() |
View all Canon VB-R12VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
Caution • You must not turn off the camera while [Restore Default Settings] is in operation. Turning off the camera at this stage may result in disabling its ability to boot correctly. • Once [OK] is clicked, you can no longer stop the process of restoring the default settings. [Network Settings] If you set this to [Save], the following settings are retained when initializing. • Administrator Name • Password • Network Settings • Time Zone • Certificates • Private Key If you set this to [Do not save], the above settings are also initialized. Since the administrator account is also initialized, you will become unable to connect to the camera. Use the Camera Management Tool to configure the initial settings (P. 37). [Restore Default Settings] The initial settings are restored according to the selection in [Network Settings] after rebooting. Note • It is recommended that you back up each current setting before you click [Exec] in [Restore Default Settings]. • The camera can also be restored to factory default settings using the reset switch. Note, however, that this will reset all camera settings to factory default settings except for date and time (P. 247). Setting Page 5 221
![](/manual_guide/products/canon-vbr12ve-network-camera-operation-guide-46aa395/221.png)