Canon VB-R12VE Network Camera Operation Guide - Page 69
Using [Pan/Tilt/Zoom] in the [Camera Control] Menu
View all Canon VB-R12VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Using [Pan/Tilt/Zoom] in the [Camera Control] Menu Open the [Camera Operation] menu and perform camera pan, tilt, and zoom operations. R1x M50 H76x Camera Viewer (1) R1x M50 4 (2) R1x M50 (3) (4) (1) [Pan/Tilt] R1x M50 The camera angle will move in the direction of each arrow. Movement will continue while you hold the button down, and stop when you release it. Click the center button to move the camera angle to the midpoint of the pan/tilt range of motion. However, if a view restriction is set (P. 128) and the midpoint is outside the restrict view area, the camera angle moves to the edge of the restrict view area. (2) Pan/Tilt Speed R1x M50 Set the operation speed by the [Pan/Tilt] button. (3) [Zoom] Click the (Zoom in) and and stop when you release it. (Zoom out) buttons. Movement will continue while you hold the button down, (4) Zoom Speed Set the operation speed by the [Zoom] button. Note Even if you change the pan/tilt speed or zoom speed setting, the speed of pan/tilt/zoom operations on the slider or panorama does not change. Operating the Camera with the Panorama Display Panel R1x M50 You can operate the camera using the frames within the panorama display panel. To display a panorama image in the panorama display panel, you must create the image and save it to the camera (P. 123). 1 Click the [Panorama Display] button. The [Panorama Display] panel is shown in the control display area. 69