Canon VB-R12VE Network Camera Operation Guide - Page 138
Tour Route Settings
View all Canon VB-R12VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
(b) (c) (b) Preview Frame (Blue Frame) Indicates the current camera angle in the video display area (c) Preset Preview Frame (White Frame) Indicates the preset/home position that is currently selected. Tour Route Settings The number of tour routes you can register and the number of presets that can be toured per route are as follows. • Maximum 5 routes, maximum 64 presets per route R1x M50 • Maximum 5 routes, maximum 20 presets per route H76x • Maximum 1 route, maximum 20 presets per route H65x MH6541x H751 M74x Note R1x M50 H76x If the effective conditions or active times of the registered tour routes conflict, the routes listed higher in the [Route List] take precedence. 1 Select the tour route to configure from [Route List]. R1x M50 H76x 2 Specify the settings for tour route name and usage. [Conditions to Enable Settings] Select the conditions to preform a preset tour. [Disable] Preset tour is not performed. [Viewers Connected] Preset tour is performed when a Viewer is connected to the camera. [Always] Preset tour is always performed. Note When [Disable] is selected, the following preset tour route settings cannot be configured. [Route Name] R1x M50 H76x Enter the tour route name. [Specify Active Time] Select [Specified] to configure a preset tour at a predetermined time, and enter the start time and end time for the preset tour. If [Viewers Connected] is set for [Conditions to Enable Settings], the preset tour operates when the Viewer is connected to the camera at the tour start time. If [Always] is set for [Conditions to Enable Settings], the preset tour always operates. [Reverse Route] R1x M50 H76x If you select [Enable], the preset tour order in [Edit Tour Route] will be reversed. 138