Canon VB-R12VE Network Camera Operation Guide - Page 76
Using Presets or the Home Position, Exiting Digital PTZ
![]() |
View all Canon VB-R12VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Important M50 H76x Even if the camera angle is changed due to a slider operation or preset, the position of the preview frame on the Digital PTZ panel is fixed. Note The Digital PTZ uses digital zoom, so the higher the digital zoom ratio, the lower the video quality. Using Presets or the Home Position H65x M64x H76x H751 M74x You can use a registered preset or home position to specify the range for Digital PTZ. If you select a preset, the preview frame on the Digital PTZ panel moves to the preset position, and the video inside the frame is displayed in the video display area. Note Register presets in advance in [Camera] > [Preset] > [Register Preset] on the Setting Page (P. 131). Exiting Digital PTZ The Digital PTZ exits if you perform one of the following operations. • Click the [Digital PTZ] button to disable it. • Click the [Viewer PTZ] button to start the Viewer PTZ. Note You can perform the following operations to continue Digital PTZ while the [Digital PTZ] button is active (purple). - Click the [Close] button on the control display area to close the Digital PTZ panel. - Click the snapshot tab or panorama display tab M50 to switch the panel in the control display area. 76
![](/manual_guide/products/canon-vbr12ve-network-camera-operation-guide-46aa395/76.png)