Canon VB-R12VE Network Camera Operation Guide - Page 147
Changing/Deleting a Privacy Mask, Privacy Mask Registration Area, Changing Mask Position and Size
![]() |
View all Canon VB-R12VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
7 Click [Apply]. The privacy mask area is saved to the camera. Saved privacy mask areas are shown in the video display area and the privacy mask registration area. Important • Check privacy mask settings again if you change the [Basic] > [Video] > [All Videos] > [Video Size Set] settings. • You will need to set the position of the privacy mask again if you change the [Video Flip] setting in [Camera] > [Camera] > [Installation Conditions]. • If you reconfigure privacy mask settings after you changed the [Camera] > [Camera] > [Camera Control] > [Image Stabilizer], reconfigure all privacy mask positions and sizes. • If you change the privacy mask settings after saving a panorama image using the panorama function, you must use the panorama function to recreate the panorama image (P. 123). R1x M50 R1x M50 H76x • After registering a privacy mask, pan, tilt and zoom the camera to confirm the areas you want to mask do not become visible when the camera angle is altered. • Privacy masks may deviate slightly from the specified position depending on the zoom position. Setting Page 5 Changing/Deleting a Privacy Mask Privacy Mask Registration Area This shows the positions of privacy mask areas in the entire area that can be captured by the camera. R1x M50 H65x M64x H76x H751 M74x (1) (1) (2) (3) (4) (3) (1) Entire Area That Camera Can Capture This shows the area that can physically be captured. R1x M50 If a panorama image is registered in the camera, the panorama image is displayed here. (2) View Restriction Area R1x M50 Appears in gray if view restrictions have been configured (P. 127). (3) Privacy Mask Areas Privacy mask areas with [Mask area] set to [Enable] (P. 146) are filled in. Privacy mask areas with [Mask area] set to [Disable] (P. 146) have diagonal lines displayed in them. (4) Preview Frame R1x M50 Indicates the current position of the camera displayed in the video display area. Changing Mask Position and Size How to Select a Privacy Mask The following methods are available for selecting the privacy mask area. • Click the privacy mask area you want to change in the privacy mask registration area. • Click [Preview] in the mask area you want to display. • Click the privacy mark area displayed in the video display area. 147
![](/manual_guide/products/canon-vbr12ve-network-camera-operation-guide-46aa395/147.png)