Canon VIXIA HF S100 VIXIA HF S10 / HF S100 Manual - Page 79

* Pressing DISP. will turn off most of the icons and displays that appear automatically but will not remove onscreen displays that were turned on manually (for example, onscreen markers, the audio level meter or the joystick guide). ** Only displayed in record pause mode, not while recording. About the Full-Screen Display During the playback of movies and photos on a TV or monitor set to fullscreen display, you may notice that the picture on the TV is slightly broader than the picture normally shown on the camcorder's screen. In record pause mode, press DISP. repeatedly until appears on the screen, to display exactly the same picture that can be seen during fullscreen playback. About the Data Code With every scene or photo recorded, the camcorder keeps a data code (date/time of recording, information about the camera setup, etc.). In mode, this information is displayed on the bottom bar and as information icons; in mode, you can select the information to be displayed with the [Data Code] setting ( 145). Digital Tele-Converter When recording video, you can enlarge the center of the screen to achieve digitally the same effect of using a tele-converter lens, without affecting video quality at all. ( 33) 1 Open ( ) the joystick guide. 2 Select ( ) [ Tele-converter] and press . appears and the center of the screen will be enlarged approximately 1.7 times. Tele-converter NOTES • You can attach the optional TL-H58 Tele-converter and use it in conjunction with this function to increase the effect. • The digital tele-converter cannot be turned on while recording. Video Š 79