Canon Vb-C60 NETWORK CAMERA VB-C60 Start Guide - Page 40
Step2 Connection to the Network
![]() |
UPC - 013803118063
View all Canon Vb-C60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Step2 Connection to the Network Connecting to the Network In the example described here, one camera is connected to a PC via a HUB. Connect a LAN cable to VB-C60 to turn the camera on. Note that if you turn on the camera and then leave it for 20 minutes, VB Initial Setting Tool (→ P.2-9) will no longer be able to detect the camera. In such case, turn the camera off and then on again. VB-C60 is equipped with PoE (Power over Ethernet). PoE can supply power to the camera via a LAN cable from an IEEE 802.3af-compliant PoE HUB. Via PoE HUB (Rear) AC power cable PoE HUB Notebook PC LAN cable When using an AC adapter (option) or external power supply, connect them as shown below. Via AC adapter or external power supply AC power cable AC adapter 2-6 (Rear) HUB Notebook PC LAN cable The figure shows the AC adapter (option).
![](/manual_guide/products/canon-vbc60-network-camera-vbc60-start-guide-55e79ab/40.png)