Canon Vb-C60 NETWORK CAMERA VB-C60 Start Guide - Page 54
Tighten the screws half way
![]() |
UPC - 013803118063
View all Canon Vb-C60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Step4 Camera Installation 2. Determine the mounting position Determine and mark the hole positions for Backside Ceiling Bracket and In-Ceiling Bracket using the template for dome, with considering the camera direction. Dome Template Direction the camera is facing Backside Ceiling Bracket ø7.0mm Height 10.0mm 3. Drill three mounting holes for Backside Ceiling Bracket and a hole for the In-Ceiling Bracket on the ceiling After drilling the holes, clean the mounting position so that drilled refuse does not Note enter the inside of the dome. 4. Fix Backside Ceiling Bracket on the back side of the ceiling It is recommended to temporarily fix the bracket with a two-sided tape to the ceiling, Tip so that it may not get loose when the dome is mounted on the ceiling. Insert the convey parts on the Backside Ceiling Bracket into the holes drilled in step 3. 5. Tighten the screws half way 2-20
![](/manual_guide/products/canon-vbc60-network-camera-vbc60-start-guide-55e79ab/54.png)