Canon Vb-C60 NETWORK CAMERA VB-C60 Start Guide - Page 62

External Device Output Terminals OUT1, OUT2, Internal Connection Chart

Get Canon Vb-C60 - Ptz Network Camera PDF manuals and user guides
UPC - 013803118063
View all Canon Vb-C60 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

Built-In Terminal External Device Output Terminals (OUT1, OUT2) The external device output terminal consists of two pairs of output terminals (OUT1, OUT2), which are nonpolar. The Viewer switches the 2 output terminals to disconnected or connected condition. The output terminals use photo couplers and are separate from the internal circuit in the VB-C60. A load to the output terminals should be within the following rated range: Rating across the output terminals: Max. 50VDC Continuous load current: 100mA or less Internal controller Internal Connection Chart 10k Ω 10k Ω 0.1µ F +3.3V 10k Ω External device + Input terminal IN1, IN2 External device - Output terminal OUT1, OUT2 The wire appropriate for external device cable is as follows. Tip Single wire AWG : # 28 - # 22 Conductor diameter: ø 0.32 - 0.65 mm (0.013 - 0.026 in) Strip the cables back roughly 8 or 9 mm (0.315 - 0.354 in). 3-6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
3-6
A load to the output terminals should be within the following rated range:
Rating across the output terminals: Max. 50VDC
Continuous load current: 100mA or less
Built-In Terminal
Internal controller
Input terminal
IN1, IN2
+
-
Output terminal
OUT1, OUT2
10k
Ω
10k
Ω
10k
Ω
+3.3V
0.1
µ
F
±
External Device Output Terminals (OUT1, OUT2)
The external device output terminal consists of two pairs of output terminals (OUT1, OUT2), which
are nonpolar. The Viewer switches the 2 output terminals to disconnected or connected condition.
The output terminals use photo couplers and are separate from the internal circuit in the VB-C60.
Tip
The wire appropriate for external device cable is as follows.
Single wire AWG
: # 28 - # 22
Conductor diameter:
ø
0.32 - 0.65 mm (0.013 - 0.026 in)
Strip the cables back roughly 8 or 9 mm (0.315 - 0.354 in).
±
Internal Connection Chart
External
device
External
device