Canon Vb-C60 NETWORK CAMERA VB-C60 Start Guide - Page 48

Step4 Camera Installation Before Installation Be sure to set the IP address (→ P.2-10) before installing the camera. ● If 20 minutes or more pass after the camera is turned on, the camera stops sending Note requests for IP address allocation and it cannot detect the IP address using VB Initial Setting Tool. Therefore, specify the IP address and confirm the camera operation before setting up the camera as directed in "Initial Setting" (→ P.2-9). ● The MAC address is printed on the bottom of the camera (→ P.1-14). Please make a note before installing the camera. ● When holding a camera, hold it with the head arm but not the camera head. ● The camera should not be installed in locations subject to direct sunlight, high temperatures, high humidity, or other adverse conditions (→ P.xiii). Setting at Upright Position The video image position of VB-C60 is set on the assumption that the camera is Note mounted on the ceiling. To invert the video image, change the "Mount" setting in "Camera" in the setting page (→ dOperation Guide P.1-17). Placing at a Flat Location Attach Rubber Feet to the camera. Place the camera on a flat and stable place. 2-14