Canon ZR-850 ZR850 ZR830 Manuals - Page 28

Basic Functions, Recording, Recording Movies - review

Page 28 highlights

28 Recording Basic Functions Recording Recording TO REVIEW THE LAST SCENE RECORDED Recording Movies Before You Begin Recording Make a test recording first to check if the camcorder operates correctly. If necessary, clean the video heads ( 2). ( 10) EXP 1 Move the lens cover switch down to to open the lens cover. 2 Holding the lock button pressed down, set the switch to CAMERA. 3 Move the / switch to (tape). 4 Press Start/Stop to begin recording. Press Start/Stop again to pause the recording. FOCUS 1 Set the mode switch to . 2 If the joystick guide does not appear on screen, press ( ) to display it. 3 Push the joystick ( ) momentarily towards and release it. • The camcorder will play back a few seconds of the last recording made and return to record pause mode. • You can also hold the joystick pressed ( ) towards or ( ) towards to play back the tape (reverse or forward respectively) to locate the point where you want to start recording. WHEN YOU HAVE FINISHED RECORDING 1 Close the lens cover and the LCD panel. 2 Turn off the camcorder. 3 Remove the tape. 4 Disconnect the power source and remove the battery pack.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98

Recording
28
Basic Functions
Recording
Recording Movies
1
Move the lens cover switch down to
to open the lens cover.
2
Holding the lock button pressed
down, set the
switch to
CAMERA.
3
Move the
/
switch to
(tape).
4
Press
to begin recording.
Press
again to pause the
recording.
T
O
REVIEW
THE
LAST
SCENE
RECORDED
1
Set the mode switch to
.
2
If the joystick guide does not appear
on screen, press (
) to display it.
3
Push the joystick (
) momentarily
towards
and release it.
• The camcorder will play back a few
seconds of the last recording made
and return to record pause mode.
• You can also hold the joystick
pressed (
) towards
or (
)
towards
to play back the tape
(reverse or forward respectively) to
locate the point where you want to start
recording.
W
HEN
YOU
HAVE
FINISHED
RECORDING
1
Close the
lens cover and the
LCD
panel
.
2
Turn off the camcorder.
3
Remove the tape.
4
Disconnect the power source and
remove the battery pack.
Recording
Before You Begin Recording
Make a test recording first to check if the
camcorder operates correctly.
If
necessary, clean the video heads (
2).
(
10)
Start/Stop
Start/Stop
EXP
FOCUS