Canon ZR-850 ZR850 ZR830 Manuals - Page 77
Additional Information, Trouble?, Power Source, Recording/Playback - screen problems
UPC - 013803078152
View all Canon ZR-850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Trouble? 77 Additional Information Trouble? Troubleshooting If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. Power Source Problem Solution • Camcorder will not turn on. Battery pack is exhausted. Replace or charge the battery pack. 19 • The camcorder switches off by itself. • The cassette compartment cover will not open. Attach the battery pack correctly. • The cassette compartment stopped half way while inserting/removing a tape. Use the compact power adapter. • The LCD/viewfinder switches on and off. Battery pack will not charge. Charge the battery pack in temperatures between 0 °C and - 40 °C (32 °F and 104 °F). Battery packs become hot with use and may not charge. When - the battery pack is outside the charging temperature range, the CHG (charge) indicator will flash irregularly. The charging will start once the battery pack temperature is below 40 °C (104 °F). The battery pack is damaged. Use a different battery pack. - If you connect a faulty power adapter or battery pack, the CHARGE indicator flashes approx. twice per second and the charging stops. Check that the compact power adapter is correctly connected to the camcorder. Recording/Playback Problem Solution Buttons will not work. Turn on the camcorder. - Load a cassette. 21 Abnormal characters appear on Disconnect the power source and reconnect it after a short time. - the screen. The camcorder If the problem still persists, disconnect all power sources does not operate properly. (including the battery pack and the backup battery). This will reset all the camcorder's settings. " " flashes on the screen. Load a cassette. 21 " " flashes on the screen. Battery pack is exhausted. Replace or charge the battery pack. 19 " " flashes on the screen. Condensation is detected. See reference page. 86 "REMOVE THE CASSETTE" Remove the cassette and reinsert it. 21 appears on the screen. The wireless controller will not Set [WL.REMOTE] to [ON]. 43 work. The battery of the wireless controller is exhausted. Replace the 23 battery. Additional Information