Canon imageCLASS MF6595cx imageCLASS MF6500 Series Starter Guide - Page 9

Set Up the Machine Set Up the Paper Cassette and Load Paper 1 Pull out the paper cassette until it stops. If you use LTR size, go to step 4. If you use other sizes, go to step 2. 4 Even the edges of the paper stack. 2 Incline the rear paper end guide until it is unlocked, then remove it from the paper cassette. By default, the guide is set to LTR. 3 Attach the guide to the slots of the desired paper size. 5 Load the paper stack print side up. Make sure the back edge of the paper stack touches the rear paper end guide (A), the paper stack does not exceed the load limit mark (B), and the load is under the small fins (C) on the paper guides. 6 Gently insert the paper cassette as far as it will go. Be careful not to get your fingers caught. - You can load the paper into the additional paper cassette (standard for MF6595cx and optional for MF6595). For attaching the additional paper cassette, see the instruction sheet that comes with the machine. - For loading paper in the multi-purpose tray, see Chapter 2, "Document and Paper," in the Basic Guide.