Canon imageCLASS MF7460 imageCLASS MF7400 Series Reference Guide - Page 209
Setting Up a Computer for Printing/Sending a Fax, Setting Printing Method
View all Canon imageCLASS MF7460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
Before Using the Machine 1 Original and Paper 2 Copying 3 Sending and Receiving 4 Printing and Scanning 5 Network (imageCLASS 6 MF7480/MF7470 Only) Remote UI (imageCLASS 7 MF7480/MF7470 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 Back Previous Next TOP Setting Up a Computer for Printing/Sending a Fax This section describes procedures for Setting Up a computer for printing/sending a fax. Before setting up a computer for printing/sending a fax, it is necessary to perform the setup procedures described in "Basic Network Settings," on p. 6-5. It is recommended that the network administrator perform the following procedures. ˙ Setting Printing Method You can select the printing method over a TCP/IP network. 1. Press (Additional Functions). 2. Press [System Settings] → [Network Settings] → [TCP/IP Settings LPD Settings]. If the System Manager ID and System Password have been set, enter the System Manager ID and System Password using - (numeric keys), then press (Log In/Out) to enter the System Settings menu. The LPD Settings screen appears. 3. Select [On] or [Off]. [On]: Uses LPD as the print application. [Off ]: Does not use LPD as the print application. 4. Press [OK]. 5. Press [RAW Settings]. 6. Select [On] or [Off]. [On]: Uses Raw as the print application. Proceed to step 7. [Off ]: Does not use Raw as the print application. Skip to step 8. 7. Select [On] or [Off] for . [On]: Establishes bidirectional communication using Port 9100. [Off ]: Does not establish bidirectional communication using Port 9100. 8. Press [OK]. 9. Press [Done] repeatedly until the Additional Functions screen closes. 10. Restart the machine. Turn off the machine, wait at least 10 seconds, then turn it on. Table of Contents Index 6-8