Canon imageCLASS MF7470 imageCLASS MF7400 Series Reference Guide - Page 181
Press [System Settings], Erasing Forwarding Settings
View all Canon imageCLASS MF7470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
Before Using the Machine 1 Original and Paper 2 Copying 3 Sending and Receiving 4 Printing and Scanning 5 Network (imageCLASS 6 MF7480/MF7470 Only) Remote UI (imageCLASS 7 MF7480/MF7470 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 Table of Contents Index Forwarding Received Documents You can set whether received documents are forwarded. 1. Press (Additional Functions). 2. Press [System Settings] → [Forwarding Settings]. If the System Manager ID and System Password have been set, enter the System Manager ID and System Password using - (numeric keys), then press (Log In/Out) to enter the System Settings menu. The Forwarding Settings screen appears. 3. Select the desired forwarding setting, then press [Validate/Invalidate]. - When you select the desired forwarding setting and press [Validate/Invalidate], the or status displayed on the left side of the Condition Name is switched. ( becomes , and becomes .) - : The received document is forwarded to the specified destination if it matches the forwarding conditions. - : The received document is not forwarded to the specified destination even if it matches the forwarding conditions. - To cancel forwarding, press [Validate/Invalidate] again. - The selected forwarding setting is enabled. - If the desired forwarding setting is not displayed, press [˝] or [˛] to scroll to the desired forwarding setting. - You can set whether to print I-fax/fax documents with forwarding errors, and whether to store them in memory. (See "Handling Documents with Forwarding Errors," on p. 4-71.) 4. Press [Done] repeatedly until the Send Basic Features screen appears. Back Previous Next TOP Erasing Forwarding Settings You can erase forwarding settings that have been stored. 1. Press (Additional Functions). 2. Press [System Settings] → [Forwarding Settings]. If the System Manager ID and System Password have been set, enter the System Manager ID and System Password using - (numeric keys), then press (Log In/Out) to enter the System Settings menu. The Forwarding Settings screen appears. 3. Select the forwarding setting that you want to erase, then press [Erase]. If the desired forwarding setting is not displayed, press [˝] or [˛] to scroll to the desired forwarding setting. 4. Press [Yes]. To cancel erasing the forwarding setting, press [No]. The selected forwarding setting is erased. 5. Press [Done] repeatedly until the Send Basic Features screen appears. 4-70