Canon imageCLASS MF7470 imageCLASS MF7400 Series Reference Guide - Page 87
Select [A4], [A4R], [B5], [B5R], [LTR], or [LTRR], then press [OK]., Press, Start
View all Canon imageCLASS MF7470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Before Using the Machine 1 Original and Paper 2 Copying 3 Sending and Receiving 4 Printing and Scanning 5 Network (imageCLASS 6 MF7480/MF7470 Only) Remote UI (imageCLASS 7 MF7480/MF7470 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 6. Select [A4], [A4R], [B5], [B5R], [LTR], or [LTRR], then press [OK]. - [Rotate] can be selected only in the following cases: - If the available paper size is selected manually - If the available paper size is loaded in both the horizontal and vertical directions - The selected paper source must have Drawer Eligibility For APS/ADS in Common Settings (from the Additional Functions screen) set to [On]. (See "Drawer Eligibility For APS/ADS," on p. 11-6.) - When you have selected Automatic Paper Selection for the Rotate mode, make sure to select a paper size which can be rotated. Otherwise, output will not be rotated. - If there is no paper which can be rotated, output will be collated. 7. Press (Start). If the original is placed on the platen glass, follow the instructions that appear on the touch panel display. Press (Start) once for each original. When scanning is complete, press [Done]. - To cancel this setting, press [Finishing], then [Cancel]. - To cancel all settings and return the machine to the Standard mode, press (Reset). Table of Contents Index Back Previous Next TOP 3-16