Canon imageFORMULA CR-180 CR-180 Instruction Manual - Page 17

Part Names 1.3 Part Names 1 This section describes the names and functions of each part. Before you connect the CR-180, take a few minutes to familiarize yourself with the main parts and their functions. ◆ Front View Jogger Support Use the jogger support if the stack of documents exceeds the loading limit mark. (See "Scan Procedure," on p.41.) Document Brace Eject Stopper Pull out the eject stopper to prevent documents from falling off the output tray. Top Cover Document Feed Guide Attach the document feed guide to hold large document stacks in place. (See "Scan Procedure," on p.41.) Power Switch Operation Buttons Jog Start Stop Jog: Uses vibration to align the documents. (Jogger) Start: Starts scanning operations. Stop: Stops scanning operations. Eject Pocket Documents are separated with a flapper into two pockets. (See p.43.) Separation Roller Gap Adjustment Dial Adjust the separation roller gap if feeding errors occur too frequently. (See "Adjusting the Separation Roller Gap," on p.66.) Bypass (manual) Mode Button Use this button when you want to scan multiple documents continuously or documents that stick together. (See "Manual Feeding (Bypass Mode)," on p.44.) Scanner Unit This unit scans the documents. Ink Cartridge Ink cartridge is not included. Purchase the ink cartridge separately. (See "About the Ink Cartridge," on p.29.) Magnetic Head for MICR Reads MICR characters that have been printed with magnetic ink. Maintenance Cover Open this cover to clear paper jams or to clean the scanner. 13