Canon imageFORMULA CR-180 CR-180 Instruction Manual - Page 27
Connecting the Scanner to, a Computer
![]() |
View all Canon imageFORMULA CR-180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
2.4 Connecting the Scanner to a Computer Connecting the Scanner to a Computer There are two ways to connect the scanner to your computer; SCSI or USB. Use 2 the method that is compatible with your computer system. CAUTION ■ Do not turn OFF the scanner or remove any interface cables when an application is running. ■ Do not connect both SCSI and USB interface cables at the same time. ■ Turn OFF the computer and the scanner before changing the cable. USB Connections Connect the scanner and the computer with the cable provided or a Hi-Speed USB 2.0 cable. Type A plug Type B plug USB Cable SCSI Connector (cannot be connected) USB Connector Connect the type B plug (square) to the scanner and connect the type A plug (flat) to Note the USB port on the computer. 23
![](/manual_guide/products/canon-imageformula-cr180-cr180-instruction-manual-adc4d0b/27.png)