Canon imageFORMULA CR-180 CR-180 Instruction Manual - Page 71

Specifications Scanner Specifications Type Document size Document feeding Scanning method Light source Scanning side Scanning mode Scanning resolution (primary scan lines x secondary scan lines) Scanning speed Automatic feeder capacity Automatic document feed capacity Interface Other functions Dimensions Weight Power requirement Power consumption Noise Operating environment Desktop sheet feed Hight: Length: Thickness: Weight: 2.4" to 4.6" (60 to 118 mm) 4.7" to 9.1" (120 to 230 mm) 0.003" to 0.008" (0.08 to 0.20 mm) 17 to 40 lb bond (64 to 157 g/m2) Automatic / Not separate Contact image sensor (CMOS) Three color (RGB) LED and 1 white line LED array Simplex/duplex Black-and-white, advanced text enhancement, error diffusion, 256 level grayscale 240 x 240 dpi, 200 x 200 dpi, 150 x 150 dpi, and 100 x 100 dpi 180 ppm (American checks) Load limit of less than 0.8" (20 mm) (within the load limit mark) Up to 200 sheets (16 to 32 lb bond/60 to 120 g/m2) SCSI III/Hi-Speed USB 2.0 Automatic paper size detection, Paper thickness and double feed detection, Dropout color, Emboss enhancement 10.7" (H) x 15.7" (W) x 9.5" (D) (271 mm (H) x 399 mm (W) x 242 mm (D)) Approximately 13.9 lb (6.3 kg) AC 120V (60 Hz) or AC 220-240V (50/60 Hz) 120 V model 220-240 V model Scanning: 0.6A maximum Standby: Under 0.2A Low-power mode: Under 6.6W 0.5A maximum Under 0.14A Under 9.6W Less than 70 dB Temperature: 50°F to 90.5°F (10°C to 32.5°C) Humidity: 20% to 80% RH ● Use the recommended operating environment for the ink cartridge when using the imprinter. ● You can use the functions noted above if your software supports them. ● These functioins may not work depending on your computer's capabilities and the software you are using. Specifications are subject to change without notice. 67