Canon imageFORMULA CR-180 CR-180 Instruction Manual - Page 60
and then open the scanning unit
View all Canon imageFORMULA CR-180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Chapter 6 Maintenance 3 Spin the rollers while wiping them clean with a firmly wrung cloth dampened with water or a mild detergent. There are 14 roller positions, as shown in the diagram below. Scanning Unit ● Use cotton swabs to clean the rollers in locations that are too narrow for your Note fingers. ● Rollers in positions o to !3 are turned by the roller in position !4. Turn the roller in position !4 to wipe the rollers. ● Open the scanning unit to clean the rollers in positions u to !2. 4 Push down the lock lever to release the lock on the scanning unit (q), and then open the scanning unit (w). Scanning Glass (two sides) Lock Lever 5 Use cotton swabs that are commercially available to clean the entire scanning glass. 56
56
Chapter 6
Maintenance
3
Spin the rollers while wiping them clean with a firmly wrung cloth
dampened with water or a mild detergent.
There are 14 roller positions, as shown in the diagram below.
●
Use cotton swabs to clean the rollers in locations that are too narrow for your
fingers.
●
Rollers in positions
o
to
!3
are turned by the roller in position
!4
. Turn the roller
in position
!4
to wipe the rollers.
●
Open the scanning unit to clean the rollers in positions
u
to
!2
.
4
Push down the lock lever to release the lock on the scanning unit
(
q
), and then open the scanning unit (
w
).
5
Use cotton swabs that are commercially available to clean the
entire scanning glass.
Scanning Unit
Note
Scanning Glass
(two sides)
Lock Lever