Canon imageFORMULA DR-M140 Document Scanner Reference Guide - Page 33

0-00-DR-M140_RG_UK.book Page 33 Monday, August 8, 2011 5:15 PM 3 Set the scan method in the top screen. A B A Specify whether to enable continuous scanning. When scanning multiple documents as one scanned image or splitting up a large document to scan in parts, select [ON] to enable continuous scanning. B Specify whether to scan the document in full auto mode. When you want to specify arbitrary scanning conditions, select [OFF] and configure the scanner settings. (See p. 37) 4 Click the Start button. IMPORTANT If you configure scanning conditions that consume a large amount of the computer's memory, scanning may stop because of insufficient memory. If an error message appears due to insufficient memory while scanning is in progress, exit the application, change the scanning conditions, and then try scanning again. Hint If a document is scanned when [Enable continuous scanning] is set to [ON], the Continuous Scanning screen (see p. 39) appears when the scanning of the document is finished. If you place the next document and click [Scan], scanning of the document starts. When scanning of all the documents is finished, click [Next step]. The document is scanned. While scanning is in progress, the number of pages scanned is displayed in addition to the scanner settings. When scanning is finished, the Output settings screen appears. 33