Canon imageFORMULA DR-M140 Document Scanner Reference Guide - Page 37

0-00-DR-M140_RG_UK.book Page 37 Monday, August 8, 2011 5:15 PM Operating the scanner with the operating panel buttons You can start scanning by selecting a job from the scanner's operating panel. 1 Set a job number every time a job is registered with CaptureOnTouch. 2 Place the document in the scanner. 3 Press the Job Select button in the operating panel to display the required job number in the Job No. Indicator. The job numbers of jobs displayed in the operating panel are allocated as follows. Job No. 1 2 to 9 Job Scan First (default / modifiable) Jobs registered with CaptureOnTouch. 4 Press the Start button in the operating panel. CaptureOnTouch is launched and the scanning of the selected job starts. Hint When scanning jobs selected with the operating panel buttons, the CaptureOnTouch main window automatically closes 5 seconds after the output process finishes. Scanner Settings By default, CaptureOnTouch scans with scanning conditions that match the document because scanning in full auto mode is enabled. If you want to specify, for example, the scanning mode and document size, you can configure the desired scanning conditions in the scanner settings. The scanner setting items are common to Scan First and Select Scan Job. When Scan First: For Scan First, configure the scanner settings before you start scanning. When Select Scan Job: For Select Scan Job, configure the scanner settings for each job. 37