Canon imageFORMULA DR-M260 User Guide - Page 45

When you want to use multistream settings for scanning Multi-stream allows you to output multiple different scanned images with a single scan operation, and output scanned images with different scanning conditions for each of the front and back pages (multistream settings). When you want to use the multistream settings for scanning, select the [Use MultiStream] checkbox on the [Others] tab to display the setting items related to multistream, and then configure the setting items in the following order. Hint The following shows the setting conditions that can be set in the multistream settings. Tab Items that can be set [Basic] tab [Color mode] and [Dots per inch] (excluding [Auto-detection] for both) [Brightness] tab [Brightness] and [Contrast] [Image processing] tab [Character Emphasis] [Image control] tab [Edge emphasis] [Feeding] Tab None (all disabled) [Error Detection] tab None (all disabled) [Others] Tab None (only [Use MultiStream] is enabled) To scan barcodes Click the [Barcode] button on the [Others] tab to configure barcode scanning conditions. See Help for details about settings. A When you want to specify different scanning conditions for the front and back pages of a document, select [Both] for [Scanning Side] on the [Basic] tab in advance. B Specify the number of scanning conditions to apply in [Stream count of Front]. Up to three can be specified. C Select [Front 1st], and then open the other tabs and set the scanning conditions. Depending on the value specified for [Stream count of Front], configure the remaining [Front 2nd] and [Front 3rd] in the same way. D When specifying the scanning conditions of the back, configure the settings in the same way as described in B to C. In this case, specify [Stream count of Back], and then set the scanning conditions for each of [Back 1st] to [Back 3rd]. 45