Canon imagePRESS C800 imagePRESS C800 Series Operation Guide - Page 159

Load media into the special feeder Load media into the special feeder The special feeder can hold up to 100 sheets (80 g/m² / 22 lb bond), approximately 10 mm / 4" high. The special feeder feeds the media face up. IMPORTANT • Do not load different sizes or types of media at the same time. • It is very important that you use the correct job settings for media such as heavy paper or transparencies. The fixing unit can become dirty, which may require a service visit. Moreover, the image quality can become poor. • Feed vellum media one sheet at a time, and remove each sheet after delivery in the output tray. When you load several sheets together a paper jam can occur. • When you make two-sided prints, printed output can crease depending on the moisture absorption of the media. • When heavy media does not pass through properly, feed the sheets one by one. • When envelopes do not pass through properly, feed the envelopes one by one. • Do not collect more than ten printed envelopes in the output tray. • Envelopes can crease during the print process. • Make sure you follow the instructions carefully. When you do not load media correctly, a paper jam, dirty machine parts, or poor print quality can occur. CAUTION When you handle paper, be careful not to cut your hands on the edges of the paper. For more information, see: Special feeder on page 42 Paper input specifications on page 296 Consumables on page 183 Supported media types for paper input optionals on page 315 Supported media sizes by paper input optional on page 317 Supported envelope types by paper input optional on page 318 Before you begin • Check and prepare the media. See: Check and prepare media before loading on page 144 Check and prepare envelopes before loading on page 146 Check and prepare transparencies before loading on page 148 • Awake the print system from sleep mode, if applicable. See: Use the energy save modes on page 50 imagePRESS C800 Series Chapter 8 - Print the jobs 159