Canon imagePRESS C800 imagePRESS C800 Series Operation Guide - Page 257
Create G7 output profiles with the embedded profiler
View all Canon imagePRESS C800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 257 highlights
Create G7 output profiles with the embedded profiler Create G7 output profiles with the embedded profiler The creation of G7 output profiles and calibration curves with PRISMAsync is very easy and quick. PRISMAsync uses media families to indicate which output profiles and calibration curves must be applied to a media. Hence, the creation of a new media family with new output profiles and calibration curves are part of this procedure. (See Media Families on page 29 and Media family calibration on page 170) [137] The G7 calibration options Before you begin Enable G7 support in the Settings Editor: [Color] -> [Color calibration]. Procedure 1. Calibrate the printer. Calibrate the printer on page 173 (See ) IMPORTANT You must always perform a printer calibration before you continue with this procedure. 2. Touch [ Create new media family] when you add new media to the media catalog. (See Add media to the media catalog on page 62). 3. Touch [G7] and [ Calibrate and profile after creation] when you create the new media family. 4. Load the calibration media. 5. Touch [OK]. 6. Follow the instructions on the control panel. 7. Close the menu. After you finish You can find the new G7 media family with output profile on the Settings Editor: [Media] -> [Media families]. imagePRESS C800 Series Chapter 11 - Help 257