Canon imagePRESS C800 imagePRESS C800 Series Operation Guide - Page 267

Print job settings Property Rough image alignment Job setting [Align] Precise image adjust- [Shift] ment What you can define Image move to corners, sides or to the middle of a sheet You can have more space for margins, punch holes or staples. • Margin shift, to define the alignment towards the binding edge • Image shift, to further define the alignment in vertical direction Different values for front and back sides are possible. Delivery settings Property Output location Sorting method Offset stacking Advanced settings Job setting -> [Print delivery] [Output location] -> [Print delivery] [Sort] -> [Print delivery] [Offset stacking] -> [Print delivery] [Advanced settings] What you can define Selection of the output location The output location must support the finishing method. Sorting by page or by sets Stacking with or without an offset Offset stacking depends on the active workflow profile. (See PRISMAsync operating concept on page 30) • Delivery order of the sheets • Delivery position of the sheets • Delivery with rotation Apply these settings for one or more finishing optionals. Print quality settings Property Margin erase Adjust color image Job setting [Margin erase] [Adjust image] What you can define Margin erase for one or more page edges with a maximum of 100 mm / 3.94" Adjustment of CMYK values on job level (See Adjust CMYK curves for a job on page 244) The advanced settings enable adjustment of CMYK curves at three control points and clip- ping of color ranges. Save the adjustments in a preset for later use. 4 imagePRESS C800 Series Chapter 12 - References 267