Canon imagePRESS C800 imagePRESS C800 Series Operation Guide - Page 94

Make a scan Make a scan You can start a scan job from the automatic document feeder or the glass plate. When the scan area has scanned the originals, the scan file goes to the destination you indicated. 1 3 2 4 5 For more information, see: About scan jobs on page 87 Scan job settings on page 264 Use templates for recurring jobs on page 96 Scan subsets (combined scanning) on page 98 Before you begin Read the instructions detailing how to use the automatic document feeder and the glass plate. (See Use the automatic document feeder to copy or scan on page 89 or Use the glass plate to copy or scan on page 91) Procedure 1. Place a set of originals into the automatic document feeder or place an original on the glass plate. 2. Touch [Jobs] -> [Copy/Scan]. 3. Select a scan template. 4. Define the original settings in the [Original] pane (1). 5. Define the output settings in the [Output] pane (2). 6. Select the destination of the scan file in the [Job] pane (3). • For scanning to email, define the subject of the email, the addresses and your account ID. • For scanning to USB, insert the USB drive into the USB port and select the required folder on the drive. 7. Enter a job name and a file name ID (3). 8. Check the results of your settings in the preview pane (4). 94 Chapter 6 - Prepare the jobs imagePRESS C800 Series