Canon imagePROGRAF PRO-6000 series User Manual - Page 115
Outward Winding, Inward Winding
View all Canon imagePROGRAF PRO-6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
1. Tap Yes. The leading edge of the roll paper advances until it is close to the roll unit. 2. Hold center of leading edge of roll paper, align right edge of take-up spool paper core's right edge and tape center to paper core while pulling on roll paper evenly. Outward Winding Inward Winding Important • If winding with inward winding, you must pass the leading edge of the roll paper to the back of the paper core and secure with tape. If this operation is difficult, you can also remove the roll holder, push the roll paper into the back, reinstall the roll holder, and pass the roll paper to the back of the paper core. 3. Align right edge of roll paper to right edge of paper core while pulling on roll paper evenly, and secure with tape. 4. While making sure that roll paper is flat, secure left edge of roll paper to paper core with tape. Outward Winding Inward Winding Important • Secure the left and right edges of the roll paper with tape within 1.97 inches (50 mm) of the edges so that neither end of the roll paper lift up. • When rewinding heavyweight paper, use strong adhesive tape to fasten it. Otherwise, a rewinding problem may result. • If you use a paper core narrower than the paper to be wound, adjust the position of the holder stopper, so that there is a gap between the holder stopper and the paper. 115