Canon imagePROGRAF PRO-6000 series User Manual - Page 116

5. Make sure the leading edge of the roll paper is not lifting up from the paper core, and if there are places lifting up, tape in additional places so that the paper does not lift up. 6. Push roll holder downward, check that roll holder is not lifting up, and tap OK. Outward Winding Inward Winding Important • If the roll holder lifts up, it may cause an error. 7. To stabilize operations when starting taking up, advance roll paper with operation panel and wind roll paper approximately one revolution. (See "Feeding Roll Paper Manually.") 8. Push roll holder downward again, and check that roll holder is not lifting up. The winding preparation is complete. When printing to the roll starts, the roll paper can be automatically wound. • If Ready to print. appears on touch screen 1. Manually advance roll paper (See "Feeding Roll Paper Manually.") or start printing, and wait for leading edge of roll paper to reach roll unit. 2. Hold center of leading edge of roll paper, align right edge of take-up spool paper core's right edge and tape center to paper core while pulling on roll paper evenly. Outward Winding Inward Winding Important • If winding with inward winding, you must pass the leading edge of the roll paper to the back of the paper core and secure with tape. If this operation is difficult, you can also 116