Canon imagePROGRAF PRO-6000 series User Manual - Page 300
Remove ink tank by grips A, and then tap
View all Canon imagePROGRAF PRO-6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 300 highlights
2. Pull forward handle part (A) of ink tank lock lever of color to replace while pressing button at B. 3. Lift ink tank lock lever until it stops, and then push it down toward front. Note • Check that the ink tank lock lever does not return. 4. Remove ink tank by grips (A), and then tap OK. Important • Store the removed ink tank with ink remaining with the ink holes (A) facing up. Otherwise, ink may leak and cause stains. Put the removed ink tank in a plastic bag and close the bag. 300
2.
Pull forward handle part (A) of ink tank lock lever of color to replace while pressing button
at B.
3.
Lift ink tank lock lever until it stops, and then push it down toward front.
Note
•
Check that the ink tank lock lever does not return.
4.
Remove ink tank by grips (A), and then tap
OK
.
Important
•
Store the removed ink tank with ink remaining with the ink holes (A) facing up. Otherwise, ink
may leak and cause stains. Put the removed ink tank in a plastic bag and close the bag.
300