Canon imagePROGRAF PRO-6000 series User Manual - Page 232

Use Stateful Address Use Name As IPv4 Host Name Domain Name SNTP Setting Use SNTP SNTP Polling Interval SNTP Server Name FTP Setting Use FTP Use FTP Authority FTP User Name Bonjour Setting Use Bonjour Bonjour Service Name 802.1X Setting Authority Type EAP TTLS Type Weak Encryption Restriction Weak Certificate Restriction Login Name User Name Server Name IPsec Setting Use IPsec Previous Shared Key Phase2 Protocol DNS dynamic setting of stateful address On/Off Use same host name/domain name as that used for IPv4 On/Off Host name XXXXXXXX (up to 64 characters) Domain name XXXXXXXX (up to 65 characters) SNTP setting information - Use SNTP On/Off SNTP polling interval 1 to 48 [sec] SNTP server name XXXXXXXX (up to 256 characters) FTP setting information - Use FTP On/Off Use FTP authority On/Off FTP user name XXXXXXXX (up to 33 characters) Bonjour setting information - Use Bonjour On/Off Bonjour service name Bonjour service name (Up to 50 alphanumeric characters) 802.1X setting information - Enable/disable 802.1X and authority Do not use/EAP-TLS/EAP-TTLS/ type PEAP Internal authority type for EAP-TTLS MSCHAPv2/PAP Weak encryption restriction Do not restrict/Restrict Weak certificate restriction Do not restrict/Restrict Login name XXXXXXXX (up to 24 characters) User name XXXXXXXX (up to 24 characters) Server name XXXXXXXX (up to 43 characters) IPsec setting information - Use IPsec On/Off Previous shared key for IPsec XXXXXXXX (up to 17 characters) IPsec phase2 protocol AH/ESP/AH+ESP 232