Canon imagePROGRAF PRO-6000 series User Manual - Page 434
Device settings, Paper-related settings, Roll paper auto switching, Do not identify size, Identify
View all Canon imagePROGRAF PRO-6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 434 highlights
• If the roll papers loaded in the upper and lower levels are different media types, the document is printed on the roll paper that matches the media type specified in the print job. If the document is being rotated 90 degrees for printing and the roll papers loaded in the upper and lower levels have different widths and different media types, set the correct combination of width and media type so that they match one of the roll papers loaded in the printer. 9. Complete the setup Click Print. When you print, the paper source is switched automatically to roll paper. Important • On the operation panel, if Device settings -> Paper-related settings -> Roll paper auto switching is set to Do not identify size, the document may be printed on the unintended roll paper. Canon recommends that you set this setting to Identify size before you print. • 2-level roll switching is not possible when the paper rolls being fed on the platen are not compatible with automatic cut-off. For checking which types of paper are compatible with automatic cut-off, look up the paper you want to use on the "Paper Information List." Note • For details about how to switch the source levels depending on the print job, see "How to Switch Paper Rolls." 434