Canon imagePROGRAF PRO-6000 series User Manual - Page 118
Inward/Outward Winding Changeover, Auto Take-up/Pause, Pause, Auto Take-up, Paper, retention setting
View all Canon imagePROGRAF PRO-6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
7. Make sure Inward/Outward Winding Changeover switch on roll unit is in desired direction and press Auto Take-up/Pause button. The Pause lamp, which has been lighted up to this point, turns off, and the Auto Take-up lamp lights up instead. The winding preparation is complete. During printing, the winding starts. Before printing, the winding starts at the same time as the printing. Important • When winding inwardly, loosening of the wound paper can be prevented by pressing the roll paper with the arm. However, doing so may produce pressure traces on the paper. In this case, tap the roll unit area of the media information display area and set Paper retention setting to Release. 118
7.
Make sure
Inward/Outward Winding Changeover
switch on roll unit is in desired direction
and press
Auto Take-up/Pause
button.
The
Pause
lamp, which has been lighted up to this point, turns off, and the
Auto Take-up
lamp lights up instead.
The winding preparation is complete. During printing, the winding starts. Before printing, the
winding starts at the same time as the printing.
Important
•
When winding inwardly, loosening of the wound paper can be prevented by pressing the
roll paper with the arm. However, doing so may produce pressure traces on the paper. In
this case, tap the roll unit area of the media information display area and set
Paper
retention setting
to
Release
.
118