Canon imagePROGRAF PRO-6000 series User Manual - Page 169

Paper-related settings Select this setting item from Device settings. • Manage remaining roll amount Select ON to print a barcode at the end of a roll before you remove it. The printed barcode can be used in managing the amount of roll paper left. Select OFF if you prefer not to print the barcode. • Roll paper auto switching Enables/Disables switching roll paper feed position by detecting the paper size. • Keep media type Select Enable to keep using the same type of paper. • Detect paper setting mismatch Selects printer action when you start printing with the paper size, the media type, and print settings different from those registered. • Paper retention setting Selects whether to contact the roll nip with the rolls in feeding paper. If you select Release, the roll nip does not contact with the rolls and you can feed paper manually. If you select Retain, the roll nip contacts with the rolls and automatic feeding is enabled. Selecting Release does not allow you to switch the paper source of rolls (upper or lower) automatically. • Advanced paper settings Specifies advanced paper settings for each paper feed position. Important • You can select Extension for borderless printing as a setting item for some paper types. If you select Small for Paper with adequate width on this setting item, a slight border remains on the paper. In addition, the paper may be smudged with extra ink. • Paper size recognition settings Selects which size is preferred when paper size detection is enabled. ◦ Cut sheet setting 1 Select whether ISO A3+ or 13"x19"(Super B) is applied when a sheet of an intermediate size is detected. ◦ Cut sheet setting 2 Select whether ISO B1 or 28"x40" (ANSI F) is applied when a sheet of an intermediate size is detected. ◦ Roll paper setting 1 Select whether A3 or 300 mm is applied when a sheet of an intermediate size is detected. ◦ Roll paper setting 2 169