Canon imagePROGRAF TX-3000 MFP T36 imagePROGRAF TX-4000 / TX-3000 / TX-2000 Se
Canon imagePROGRAF TX-3000 MFP T36 Manual
View all Canon imagePROGRAF TX-3000 MFP T36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon imagePROGRAF TX-3000 MFP T36 manual content summary:
- Canon imagePROGRAF TX-3000 MFP T36 | imagePROGRAF TX-4000 / TX-3000 / TX-2000 Se - Page 1
manual in a handy location for future reference. • Instructions in this Setup Guide show the TX in the illustration. TX-2000 TX-3000 TX-4000 Installation space (W Manuals (P.14) If an error message appears during setup or other problems CANON INC. 2017 1 PRINTED IN XXXXXXXX 479 - Canon imagePROGRAF TX-3000 MFP T36 | imagePROGRAF TX-4000 / TX-3000 / TX-2000 Se - Page 2
W. Basket locking support (x 2) H M, N, O, P, U R W I T Q L S J K C D B A V FE T GS • Some items are included with the printer but not described in this manual. Note Keep these items in a safe place after setup because they are used in various printing applications. • For instructions on the - Canon imagePROGRAF TX-3000 MFP T36 | imagePROGRAF TX-4000 / TX-3000 / TX-2000 Se - Page 3
you will install the printer by referring to the Printer Stand Setup Guide (separate manual). • When not using the stand -> Proceed to "Install the Open the stacker box and take out rod 2. 2. Hook rod 2 onto the supporting plates of the stand legs. Attach such that the holes (A) on rod 2 are facing - Canon imagePROGRAF TX-3000 MFP T36 | imagePROGRAF TX-4000 / TX-3000 / TX-2000 Se - Page 4
printer. - TX-4000 : Approx. 211 lb (96 kg) - TX-3000 : Approx. 191 lb (87 kg) - TX-2000 : Approx. 163 lb (74 kg) printer, the printer may become damaged. • When standing up the printer or supporting the printer, hold the metal parts of the printer. If you hold a - Canon imagePROGRAF TX-3000 MFP T36 | imagePROGRAF TX-4000 / TX-3000 / TX-2000 Se - Page 5
hex screws each on the left and right from the bottom of the supporting plate. • The removed alignment rod will be used when attaching the Important the roll unit to the stand by referring to the Roll Unit Setup Guide (separate manual). • When not using the roll unit -> Proceed to "Attach the - Canon imagePROGRAF TX-3000 MFP T36 | imagePROGRAF TX-4000 / TX-3000 / TX-2000 Se - Page 6
there is one attached. 4 Close the top cover. A 5 Plug the power cord into the power supply connector on the back of the printer. TX-2000 / TX-3000 TX-4000 6 Plug the power cord into the outlet. 7 Turn on the printer. 8 When the language selection screen appears on the touch screen, select - Canon imagePROGRAF TX-3000 MFP T36 | imagePROGRAF TX-4000 / TX-3000 / TX-2000 Se - Page 7
Install the Ink Tanks Install the 5 ink tanks by following the instructions on the screen. 1 Instructions on ink tank installation are shown on the screen. Open the ink tank covers as instructed. 2 Release the ink tank lock lever for the color of ink to install. Pull the handle part (A) towards - Canon imagePROGRAF TX-3000 MFP T36 | imagePROGRAF TX-4000 / TX-3000 / TX-2000 Se - Page 8
7 Lift up the ink tank lock lever once and then push it down. 8 Firmly push down the handle part of the ink tank lock lever all the way in. 9 Make sure the ink lamp lights red. 10 Repeat steps 2 to 9 to install each of the ink tanks. Close the ink tank covers. When the screen for confirming - Canon imagePROGRAF TX-3000 MFP T36 | imagePROGRAF TX-4000 / TX-3000 / TX-2000 Se - Page 9
locking cover by following the instructions on the screen, and tap OK. Do not touch the contacts (A) on the carriage. Instructions are now shown on the any circumstances. Touching it may cause damage to the print head or printing problems. • The print head contains ink, so be careful not to spill - Canon imagePROGRAF TX-3000 MFP T36 | imagePROGRAF TX-4000 / TX-3000 / TX-2000 Se - Page 10
the Paper Load the paper for adjustment. 1 Tap OK. Tap Manual. 2 Open the top cover and lift the release lever. • of the paper facing up. Only one sheet of paper is needed. B A When using the TX-2000 without the printer stand • Check that there is nothing under the printer. Important If there - Canon imagePROGRAF TX-3000 MFP T36 | imagePROGRAF TX-4000 / TX-3000 / TX-2000 Se - Page 11
connected. Do not connect the USB cable yet. 1 Tap USB connection. Check the message about the connection method and tap Yes if there are no problems. 4 Tap OK. The paper starts feeding, and then the printer automatically starts charging the ink for the first time and adjusting the print head - Canon imagePROGRAF TX-3000 MFP T36 | imagePROGRAF TX-4000 / TX-3000 / TX-2000 Se - Page 12
computer. If you are using Windows 7 1 Insert the setup CD-ROM into the computer. 2 Click Set Up. Perform the remaining operations by following the instructions on the screen. 2 Click the popup message for the disk drive and click Run Msetup4.exe on the screen that is displayed. 2 When the - Canon imagePROGRAF TX-3000 MFP T36 | imagePROGRAF TX-4000 / TX-3000 / TX-2000 Se - Page 13
system. Cleaning... Configure the wireless LAN settings by following the instructions on the screen. • Before using the printer, the software Note stand. Refer to "Attach the Accessory Pocket" in the Printer Stand Setup Guide (separate manual) for details on how to attach. A B To load roll paper - Canon imagePROGRAF TX-3000 MFP T36 | imagePROGRAF TX-4000 / TX-3000 / TX-2000 Se - Page 14
Canon website by any of the following methods. • Enter the URL 2 Click or tap Read Online Manual. Perform the remaining operations by following the instructions on the screen to display the Online Manual Printer error has occurred. See the manual and contact the service center. Cause There is no
1
QT6-2184-V01
PRINTED IN XXXXXXXX
XXXXXXXX
© CANON INC. 2017
47±²³´µ9¶³
It is recommended that you reserve space of the following dimensions to allow you to work around the printer.
Check the completed image of the printer you purchased and make sure you have enough space to install the printer.
In order to ensure that this product is used safely, be sure to read the precautions.
-> Quick Guide (separate manual)
Before Setting Up the Printer
Read this manual before attempting to operate the printer.
Keep this manual in a handy location for future reference.
Set up the printer using the following procedure.
• Windows is a trademark or registered trademark of Microsoft Corporation in the
U.S. and/or other countries.
TX-2000
Installation space (W x D x H)
• When not using the stand
59.5 x 56.5 x 40.2 inches (1510 x 1434 x 1020 mm)
• When using the stand
59.5 x 66.3 x 61.5 inches (1510 x 1684 x 1560 mm)
TX-3000
Installation space (W x D x H)
70.5 x 66.3 x 61.5 inches (1790 x 1684 x 1560 mm)
TX-4000
Installation space (W x D x H)
78.5 x 66.3 x 61.5 inches (1993 x 1684 x 1560 mm)
Confirming the Installation Space
Overview of Setup
Important
• The printer stand and roll unit may be options depending on the model. Care is required because the required space may differ depending on whether or not the
options are used.
• The space required in front of the printer differs on how the basket supplied with the printer stand is used. This shows the installation space when used in the
position in the illustration.
Caution
• Instructions in this Setup Guide show the TX-4000 printer. Note that your printer may look different from these illustrations in some cases. However, the basic
operations are the same.
RMC (Regulatory Model Code): K10475
RMC (Regulatory Model Code): K10474
RMC (Regulatory Model Code): K10473
If an error message appears during setup or other problems occur,
refer to "Responding to Messages" on p.14.
Setup Guide
Introductory Information
ENGLISH
• Check this also after setup is complete.
3.9 inches
(100 mm)
(When not using
the stand)
3.9 inches (100 mm)
(When using the
stand)
23.6 inches
(600 mm)
(When using the stand)
(When not
using the stand)
5.9 inches (150 mm)
7.9 inches
(200 mm)
7.9 inches
(200 mm)
23.6 inches
(600 mm)
7.9 inches
(200 mm)
7.9 inches
(200 mm)
23.6 inches
(600 mm)
3.9 inches
(100 mm)
5.9 inches
(150 mm)
7.9 inches
(200 mm)
7.9 inches
(200 mm)
23.6 inches
(600 mm)
3.9 inches
(100 mm)
5.9 inches
(150 mm)
*
Assemble the Stand
(P.3)
* Refer to the separate
manual
Attach the Alignment Rod
(P.3)
Install the Printer
(P.3)
*
Attach the Roll Unit
(P.5)
* Refer to the separate
manual
*
Attach the Basket
(P.5)
* Refer to the separate
manual
*
Assemble the Stacker
(P.5)
* Refer to the separate
manual
Turn On the Printer
(P.5)
Install the Ink Tanks
(P.7)
Install the Print Head
(P.9)
Load the Paper
(P.10)
Storage Locations
(P.13)
How to Display the Online Manuals
(P.14)
• Perform Print Head Adjustment
and Select the Connection Method
(P.11 ~ 12)
• Connect to the Printer