Canon imagePROGRAF TX-3000 MFP T36 imagePROGRAF TX-4000 / TX-3000 / TX-2000 Se - Page 3
Assemble the Stand, Attach the Alignment Rod, Install the Printer
![]() |
View all Canon imagePROGRAF TX-3000 MFP T36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Assemble the Stand • When using the stand -> Assemble the stand on which you will install the printer by referring to the Printer Stand Setup Guide (separate manual). • When not using the stand -> Proceed to "Install the Printer". Attach the Alignment Rod 1 Attach the rod for aligning the printer to the stand. When using the basket included with the stand 1. Prepare the basket rod (cord side). 2. Hook the basket rod onto the supporting plates of the stand legs. Attach such that the protrusions (A) on the basket rod are facing towards you. When using the stacker 1. Open the stacker box and take out rod 2. 2. Hook rod 2 onto the supporting plates of the stand legs. Attach such that the holes (A) on rod 2 are facing up. A A A Install the Printer 1 Remove the packaging material. 2 Remove all of the tape and other packaging material. Open the top cover (A) and output guide (B), and then remove the tape affixed to the roll holder. A B 3
![](/manual_guide/products/canon-imageprograf-tx3000-imageprograf-tx4000-tx3000-tx2000-setup-guide-c6beba4/3.png)