Canon imagePROGRAF TX-3000 MFP T36 imagePROGRAF TX-4000 / TX-3000 / TX-2000 Se - Page 13

Configure Wireless LAN Settings on the Printer If you selected No in step 3 for connecting to a wireless LAN on p.11, configure the wireless LAN settings using the touch screen of the printer. 1 Once the print head adjustment has finished, check that the following screen appears and tap OK. 2 Select and tap the connection method. 3 When the home screen appears and appears, the wireless LAN settings are complete. • If the following message appears, the Note printer initial settings are not finished. Wait until the above screen appears. Checking the nozzle. Preparing the ink system. Cleaning... Configure the wireless LAN settings by following the instructions on the screen. • Before using the printer, the software Note needs to be installed on the computer that is connected to the printer. Proceed to "Connect to the Printer" on p.12. Storage Locations A: Spare ink box Can be used to store spare ink tanks. • Do not place a used ink tank. Important B: A ccessory pocket • Can be used to store accessories such as the 3-inch paper core attachment. • The accessory pocket is included with the stand. Refer to "Attach the Accessory Pocket" in the Printer Stand Setup Guide (separate manual) for details on how to attach. A B To load roll paper after setup, tap the paper settings display area from the home screen, then (roll paper icon), then Replace paper, and follow the instructions on the screen. For details, refer to the Online Manual that can be accessed by the procedure in "How to Display the Online Manuals" (p.14). 13