Canon imagePROGRAF TX-3000 MFP T36 imagePROGRAF TX-4000 / TX-3000 / TX-2000 Se - Page 1

Introductory Information Setup Guide ENGLISH Read this manual before attempting to operate the printer. Keep this manual in a handy location for future reference. • Instructions in this Setup Guide show the TX-4000 printer. Note that your printer may look different from these illustrations in some cases. However, the basic Caution operations are the same. Before Setting Up the Printer In order to ensure that this product is used safely, be sure to read the precautions. -> Quick Guide (separate manual) Confirming the Installation Space It is recommended that you reserve space of the following dimensions to allow you to work around the printer. Check the completed image of the printer you purchased and make sure you have enough space to install the printer. • The printer stand and roll unit may be options depending on the model. Care is required because the required space may differ depending on whether or not the Important options are used. • The space required in front of the printer differs on how the basket supplied with the printer stand is used. This shows the installation space when used in the position in the illustration. TX-2000 TX-3000 TX-4000 Installation space (W x D x H) • W hen not using the stand 59.5 x 56.5 x 40.2 inches (1510 x 1434 x 1020 mm) • W hen using the stand 59.5 x 66.3 x 61.5 inches (1510 x 1684 x 1560 mm) 5.9 inches (150 mm) Installation space (W x D x H) Installation space (W x D x H) 70.5 x 66.3 x 61.5 inches (1790 x 1684 x 1560 mm) 78.5 x 66.3 x 61.5 inches (1993 x 1684 x 1560 mm) 5.9 inches (150 mm) 5.9 inches (150 mm) 7.9 inches (200 mm) 23.6 inches (600 mm) (When not using the stand) 23.6 inches (600 mm) (When using the stand) 3.9 inches (100 mm) (When not using the stand) 7.9 inches (200 mm) 3.9 inches (100 mm) (When using the stand) 7.9 inches (200 mm) 23.6 inches (600 mm) 7.9 inches (200 mm) 7.9 inches (200 mm) 3.9 inches (100 mm) 23.6 inches (600 mm) Overview of Setup 7.9 inches (200 mm) 3.9 inches (100 mm) Set up the printer using the following procedure. * Assemble the Stand Attach the Alignment Rod (P.3) * Refer to the separate manual (P.3) Install the Printer (P.3) * Attach the Roll Unit * Attach the Basket * Assemble the Stacker Turn On the Printer (P.5) * Refer to the separate manual (P.5) * Refer to the separate manual (P.5) * Refer to the separate manual (P.5) Install the Ink Tanks (P.7) Install the Print Head (P.9) Load the Paper (P.10) • Perform Print Head Adjustment and Select the Connection Method (P.11 ~ 12) • Connect to the Printer • Check this also after setup is complete. Storage Locations (P.13) How to Display the Online Manuals (P.14) If an error message appears during setup or other problems occur, refer to "Responding to Messages" on p.14. • Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries. RMC (Regulatory Model Code): K10475 RMC (Regulatory Model Code): K10474 RMC (Regulatory Model Code): K10473 QT6-2184-V01 XXXXXXXX © CANON INC. 2017 1 PRINTED IN XXXXXXXX 479