Casio EX-Z1200 Owners Manual - Page 238
Connecting the Camera to Your Computer, after the First Time
UPC - 079767622770
View all Casio EX-Z1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 238 highlights
Camera-Computer Connection Pressing the cradle's [USB] button puts it into the USB mode, which is indicated by the USB lamp lighting green. In this mode, your computer recognizes the memory card loaded in the camera (or the camera's built-in memory if it does not have a memory card loaded) as a removable disk. From now on, you will not have to perform steps 3 through 5 in the above procedure when you connect the camera to your computer (unless you change the camera's USB settings for some reason). • With some Windows setups, you may see a guidance message appear on your display to let you know about the new removable disk. If this happens, simply close the guidance message dialog box. IMPORTANT! • Never disconnect the USB cable or remove the camera from the USB cradle without exiting the USB mode first. Doing so can corrupt image data. See "Removing the Camera from the USB Cradle" on page 241 for the correct steps you need to perform to remove the camera from the cradle safely. ■ Connecting the Camera to Your Computer after the First Time Since you need to install the USB driver and configure menu settings only the first time you connect the camera to your computer, later connections are much simpler. 1. Press the camera's [ON/OFF] button to turn it off and then place the camera on the USB cradle. 2. Press the USB cradle's [USB] button. • Pressing the cradle's [USB] button puts it into the USB mode, which is indicated by the USB lamp lighting green. [USB] 238 USING THE CAMERA WITH A COMPUTER