Casio XJ-560 Owners Manual - Page 12
Using Color Mode (COLOR MODE), Auto Keystone Correction, AF/AK at Short Projection Distances
View all Casio XJ-560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Projection Operations Auto Keystone Correction Certain operational environments and other factors can make it impossible to achieve sufficient accuracy when performing keystone correction. If an image appears distorted after performing auto keystone correction check the sensors for dirt and clean them if necessary. See page 70 for more information. If this does not solve the problem, try changing the position of the projector slightly or perform manual keystone correction. AF/AK at Short Projection Distances Performing the AF/AK (Auto Focus, auto keystone correction) operation when there is sharp angle and when there is only a short distance between the projector and screen can result in the left and right edges of the image to be out of focus. If this happens, reduce the angle or increase the distance between the projector and screen. Using Color Mode (COLOR MODE) The color mode setting lets you specify the type of image you will be projecting, so the projector can optimize image color. To change the color mode setting 1. Press the [COLOR MODE] key. z This causes the color mode screen to appear on the projection image. The z mark indicates the current color mode setting. z For details about each of the settings, see "Image Adjustment J Color Mode" on page 32. 2. Use the [S] and [T] keys to move the cursor to the setting you want, and then press the [ENTER] key. z This moves the z to item that is selected by the cursor, and applies the setting to the image. 3. To close the setup screen, press the [ESC] or [COLOR MODE] key. 12