Casio XJ-560 Owners Manual - Page 73

Appendix Problem The projector does not project any image from the connected device. The projector does not correctly project the image from the connected device. When RGB/Component is selected as the input source, the color of the projected image or the image itself is abnormal. The projector keys to not work. Cause and Recommended Action The connected computer or video device may not be turned on, or it may not be outputting a video signal. J Make sure the connected computer or video device is turned on, and perform the required operation on it to output a video signal. The correct output source is not selected on the projector. J On the projector, select the input source that corresponds to the device whose image you are trying to project. Images may not project correctly when you have the component output terminal of a video device connected to the RGB terminal of the projector. J Try using the projector's VIDEO input terminal or S-VIDEO input terminal (see "Connecting to a Standard Video Device"). Images sent from a computer over an RGB cable may not project correctly if [Component] is selected for the "Input Settings J RGB Input" menu setting. J Turn off the projector and disconnect the AC cord and RGB cable. Next, reconnect the AC cord only and turn on power. Change the "Input Settings J RGB Input" menu setting to [RGB]. Try projecting again. The settings configured on the setup menu's "Input Settings J RGB Input" menu may not be compatible with the device connected to the RGB input terminal. J Use the setup menu to configure the "Input Settings J RGB Input" menu settings to correct the problem. Key lock or power on password may be turned on. J Turn off key lock and/or power on password. See - page 6 User's Guide (Basic Operation) page 42 page 42 page 47 73