Cisco 1230AG Configuration Guide

Cisco 1230AG - Aironet - Wireless Access Point Manual

Get Cisco 1230AG - Aironet - Wireless Access Point PDF manuals and user guides View all Cisco 1230AG manuals
Add to My Manuals
Save this manual to your list of manuals

Cisco 1230AG manual content summary:

  • Cisco 1230AG | Configuration Guide - Page 1
    VIEW Certified Configuration Guide Cisco 2100/4400/5500 Series WLC (Wireless LAN Controller), WiSM (Wireless Services Module) and 3750G Integrated WLC with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs October 2010 Edition 1725-36192-001 Version H
  • Cisco 1230AG | Configuration Guide - Page 2
    Configuration Guide Polycom's products are trademarks and/or service marks of Polycom, Inc. and . No part of this manual, or the software described herein specifications contained herein are the property of Polycom and shall be neither reproduced in whole or in part com 2 PN: 1725-36192-001_H
  • Cisco 1230AG | Configuration Guide - Page 3
    Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs Contents Overview...4 Certified Product Summary 4 Known Limitations 5 Polycom References 5 Product Support 6 Section 1: Configuration for SVP Operation 7 Network Topology 7 Configuring a New Controller Starting
  • Cisco 1230AG | Configuration Guide - Page 4
    Systems: www.cisco.com Controllers:  2100, 4400, 5500 Series WLC (Wireless LAN Controller)  3750G Integrated WLC  WiSM (Wireless Services Module) APs: 1100 1130 1140 1200 1230 1240 1250 AP Radio(s): Security: 2.4 GHz (802.11b/g/n), 5 GHz (802.11a/n) WPA-PSK, WPA2-PSK, WPA2-Enterprise (EAP
  • Cisco 1230AG | Configuration Guide - Page 5
    Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs *SpectraLink handset models 8020/8030 and their OEM derivates are verified compatible with the WLAN hardware and software identified in the table. Throughout the remainder of this document they will be referred to
  • Cisco 1230AG | Configuration Guide - Page 6
    www.cisco.com/en/US/docs/wireless/access_point/con version/lwapp/upgrade/guide/lwapnote.html 3. For more information on the APs in Lightweight mode, see Cisco Aironet Access Point Support for Lightweight Access Point Protocol [Cisco Aironet 1130 AG Series] and Cisco Aironet Access Point Support for
  • Cisco 1230AG | Configuration Guide - Page 7
    Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs Section 1: Configuration for SVP Operation Network Topology SIP PBX RADIUS Authentication Server (for WPA2-Enterprise Security) SVP Server TFTP Server, DHCP Server Cisco AP LINK ACT SERVICE CONSOLE STATUS
  • Cisco 1230AG | Configuration Guide - Page 8
    4400 Series WLC, or other appropriate controller, found at Cisco's website. This document contains a detailed explanation of using the Startup Wizard for the 4400: http://www.cisco.com/en/US/docs/wireless/controller/4400/quic k/guide/ctrlv32.html#wp34023 5. Once the controller has been configured
  • Cisco 1230AG | Configuration Guide - Page 9
    Section 1: SVP Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs Installing Software 1. Make sure that the correct version of software, listed in the Product Summary, is installed on the controller. From the main menu, click Monitor. 2. In the navigation pane, click
  • Cisco 1230AG | Configuration Guide - Page 10
    VIEW Certified Configuration Guide The setup instructions outlined in this document are for the configuration shown in the diagram only. Your configuration may differ, and the appropriate adjustments must be made. 1. From the main menu, click Controller. 2. Set the Ethernet Multicast Mode to
  • Cisco 1230AG | Configuration Guide - Page 11
    Section 1: SVP Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs 2. In the APs supporting the handsets must be configured to enable the corresponding features. 1. Power-on and connect the APs to the network. Wait a few minutes for the APs to find the controller.
  • Cisco 1230AG | Configuration Guide - Page 12
    VIEW Certified Configuration Guide Configuration for handsets running in 802.11b & b/g mixed mode 1. From the main menu, click Wireless. 2. In the navigation pane, under Access Points click Radios, then select 802.11b/g/n. All the APs that are connected should be listed, showing their Operational
  • Cisco 1230AG | Configuration Guide - Page 13
    1: SVP Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs Global settings for RF Channel Assignment and Tx Power Level Assignment were not tested. For Custom Tx Power and RF Channel settings please consult your facility's RF site survey - optimized for wireless voice
  • Cisco 1230AG | Configuration Guide - Page 14
    8020/8030 Wireless Telephones. 9. Use the default Fragmentation Threshold (2346 bytes). 10. Set the Beacon Period to 100. 11. The handsets do not support dynamic power and will not utilize the information element that is set when DTPC Support is enabled. The handset power should be configured to
  • Cisco 1230AG | Configuration Guide - Page 15
    Section 1: SVP Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs Configuration for handsets running in 802.11a mode 1. From the main menu, click Wireless. 2. In the navigation pane, under Access Points click Radios, then select 802.11a /n. All the APs that are
  • Cisco 1230AG | Configuration Guide - Page 16
    VIEW Certified Configuration Guide Screenshot for 1100, 1130, 1200, 1230 and 1240 series access points: Screenshot for 1140 and 1250 series access points: 7. In the navigation pane under 802.11a/n, click Network. 8. Set 802.11a Network Status to Disable; the radio will be re-enabled after setting
  • Cisco 1230AG | Configuration Guide - Page 17
    Section 1: SVP Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs For additional details on RF deployment please see the Deploying Enterprise-Grade Wi-Fi Telephony white paper and the Best Practices Guide for Deploying SpectraLink 8020/8030 Wireless Telephones. 10. Use
  • Cisco 1230AG | Configuration Guide - Page 18
    VIEW Certified Configuration Guide 1. From the main menu, click WLANs. 2. In the WLANs screen, the SpectraLink Wireless Telephone configuration.  When Radio Policy is configured for 802.11b/g only, the handsets should be configured for 802.11b & b/g mixed.  When Radio Policy is configured for 802.
  • Cisco 1230AG | Configuration Guide - Page 19
    1: SVP Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs 8. Under the QoS tab, set Quality of Service to Platinum. This is the required setting for voice traffic. 9. Set WMM Policy to Disabled (Note: This is required for usage with SpectraLink Wireless Telephones
  • Cisco 1230AG | Configuration Guide - Page 20
    VIEW Certified Configuration Guide b. For WPA-PSK, under WPA+WPA2 Parameters: i. Select the WPA-Policy check box. ii. Select the TKIP check box for WPA Encryption. iii. At Auth Key Mgmt select PSK from the drop-down list. The PSK Format may be selected as ASCII or HEX for both WPA-PSK and WPA2-PSK
  • Cisco 1230AG | Configuration Guide - Page 21
    Section 1: SVP Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs 12. Click the Apply button to save all changes. PN: 1725-36192-001_H 21
  • Cisco 1230AG | Configuration Guide - Page 22
  • Cisco 1230AG | Configuration Guide - Page 23
    Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs Section 2: Configuration for Wi-Fi Standard QoS or CCXv4 Operation Network Topology SIP PBX RADIUS Authentication Server (for WPA2-Enterprise Security) TFTP Server, DHCP Server Cisco AP LINK ACT SERVICE CONSOLE
  • Cisco 1230AG | Configuration Guide - Page 24
    4400 Series WLC, or other appropriate controller, found at Cisco's website. This document contains a detailed explanation of using the Startup Wizard for the 4400: http://www.cisco.com/en/US/docs/wireless/controller/4400/quic k/guide/ctrlv32.html#wp34023 5. Once the controller has been configured
  • Cisco 1230AG | Configuration Guide - Page 25
    Section 2: WMM Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs Installing Software 1. Make sure that the correct version of software, listed in the Product Summary, is installed on the controller. From the main menu, click Monitor. 2. In the navigation pane, click
  • Cisco 1230AG | Configuration Guide - Page 26
    VIEW Certified Configuration Guide 12. Reboot the Controller. Controller Setup The initial setup of the controller is shown below. The setup instructions outlined in this document are for the configuration shown in the diagram only. Your configuration may differ, and the appropriate adjustments must
  • Cisco 1230AG | Configuration Guide - Page 27
    Section 2: WMM Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs Connecting APs As the APs are connected to the network, they should automatically find the controller via the CAPWAP discovery algorithms. The Dynamic Host Configuration Protocol (DHCP) server will
  • Cisco 1230AG | Configuration Guide - Page 28
    given AP radio must have the same QoS setting. All APs supporting the handsets must be configured to enable the corresponding features. 1. Power-on and connect the APs to the network. Wait a few minutes for the APs to find the controller. 2. Verify the APs are associated to the WLC. 3. From the main
  • Cisco 1230AG | Configuration Guide - Page 29
    Section 2: WMM Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs Configuration for handsets running in 802.11b & b/g mixed mode 1. From the main menu, click Wireless. 2. In the navigation pane, under Access Points click Radios, then select 802.11b/g/n. All the APs
  • Cisco 1230AG | Configuration Guide - Page 30
    Guide 3. Select Configure from the drop-down list for the access point you wish to change. Global settings for RF Channel Assignment and Tx Power Level Assignment were not tested. For Custom Tx Power and RF Channel settings please consult your facility's RF site survey - optimized for wireless
  • Cisco 1230AG | Configuration Guide - Page 31
    Section 2: WMM Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs Screenshot for 1140 and 1250 series access points: 7. In the navigation pane under 802.11b/g/n, click Network. 8. Set 802.11b/g Network Status to Disable. The radio will be re-enabled after setting
  • Cisco 1230AG | Configuration Guide - Page 32
    VIEW Certified Configuration Guide handset power should be configured to match the highest transmit power of the APs. Click Apply button to saved changes Admission Control (ACM) must be enabled on both the Voice and Video AC when the handset is configured for Admission Control Mandatory. 15. In the
  • Cisco 1230AG | Configuration Guide - Page 33
    Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs Any WLAN using the network must be disabled before changing Admission Control 21. Enable 802.11b/g Network Status and 802.11g Support if SpectraLink Wireless Telephones are configured for 802.11b & b/g mixed mode. 22.
  • Cisco 1230AG | Configuration Guide - Page 34
    Select Configure from the drop-down list for the access point you wish to change. Global settings for RF Channel Assignment and Tx Power Level Assignment were not tested. For Custom Tx Power and RF Channel settings please consult your facility's RF site survey - optimized for wireless voice traffic
  • Cisco 1230AG | Configuration Guide - Page 35
    Section 2: WMM Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs Screenshot for 1100, 1130, 1200, 1230 and 1240 series access points: Screenshot for 1140 and 1250 series access points: 7. In the navigation pane under 802.11a/n, click Network. 8. Set 802.11a Network
  • Cisco 1230AG | Configuration Guide - Page 36
    . Set the Beacon Period to 100. 12. SpectraLink Wireless Telephones do not support dynamic power and will not utilize the information element that is set when DTPC support is enabled. The handset power should be configured to match the highest transmit power of the APs. 13. Click the Apply button to
  • Cisco 1230AG | Configuration Guide - Page 37
    Section 2: WMM Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs 17. In the navigation pane under 802.11a/n, select Voice 18. Select the Admission Control (ACM) checkbox. (This step is optional if the handset is configured with Admission Control set to Optional, this
  • Cisco 1230AG | Configuration Guide - Page 38
    VIEW Certified Configuration Guide 1. From the main menu, click WLANs. 2. In the WLANs screen, the SpectraLink Wireless Telephone configuration.  When Radio Policy is configured for 802.11b/g only, the handsets should be configured for 802.11b & b/g mixed.  When Radio Policy is configured for 802.
  • Cisco 1230AG | Configuration Guide - Page 39
    2: WMM Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs 8. Under the QoS tab, set Quality of Service to Platinum. down list. a. For WPA2-PSK, under WPA+WPA2 Parameters: i. Select the WPA2-Policy check box. ii. Select the AES check box for WPA2-Encryption. iii. At
  • Cisco 1230AG | Configuration Guide - Page 40
    VIEW Certified Configuration Guide The PSK Format may be selected as ASCII or HEX for both WPA-PSK and WPA2-PSK policies. c. For WPA2-Enterprise (802.1X), select WPA+WPA2 Parameters: i. Select the WPA2 Policy check box. ii. Select the AES check box for WPA2 Encryption. iii. At Auth Key Mgmt, select
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
October 2010 Edition
1725-36192-001
Version H
VIEW Certified Configuration Guide
Cisco
2100/4400/5500 Series WLC (Wireless LAN Controller),
WiSM (Wireless Services Module) and 3750G Integrated WLC
with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs