Cisco 1230AG Configuration Guide - Page 14

Radio Standard, Minimum Available, Signal Strength RSSI, Maximum, Mandatory Data Rate, - ap

Get Cisco 1230AG - Aironet - Wireless Access Point PDF manuals and user guides View all Cisco 1230AG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

VIEW Certified Configuration Guide 802.11 Radio Standard 802.11b 802.11g 802.11a Minimum Available Signal Strength (RSSI) -70 dBm -60 dBm -63 dBm -47 dBm -60 dBm -45 dBm Maximum "Mandatory" Data Rate 1 Mb/s 11 Mb/s 6 Mb/s 54 Mb/s 6 Mb/s 54 Mb/s For additional details on RF deployment please see the Deploying Enterprise-Grade Wi-Fi Telephony white paper and the Best Practices Guide for Deploying SpectraLink 8020/8030 Wireless Telephones. 9. Use the default Fragmentation Threshold (2346 bytes). 10. Set the Beacon Period to 100. 11. The handsets do not support dynamic power and will not utilize the information element that is set when DTPC Support is enabled. The handset power should be configured to match the highest transmit power of the APs. Click the Apply button to save the settings. 12. In the navigation pane under 802.11b/g/n, select EDCA Parameters. 13. Select SpectraLink Voice Priority from the drop-down list. 14. Click the Apply button to save the settings. 15. In the navigation pane under 802.11b/g/n, select Network. 16. Enable 802.11b/g Network Status and 802.11g Support if SpectraLink Wireless Telephones are configured for 802.11b & b/g mixed mode. 17. Click the Apply button to save the settings. 14 PN: 1725-36192-001_H

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
VIEW Certified Configuration Guide
PN: 1725-36192-001_H
14
802.11
Radio Standard
Minimum Available
Signal Strength (RSSI)
Maximum
"Mandatory" Data Rate
802.11b
-70 dBm
1 Mb/s
-60 dBm
11 Mb/s
802.11g
-63 dBm
6 Mb/s
-47 dBm
54 Mb/s
802.11a
-60 dBm
6 Mb/s
-45 dBm
54 Mb/s
For additional details on RF deployment please see the
Deploying
Enterprise-Grade Wi-Fi Telephony
white paper and the
Best
Practices Guide for Deploying SpectraLink 8020/8030 Wireless
Telephones
.
9.
Use the default
Fragmentation
Threshold
(2346 bytes).
10.
Set the
Beacon
Period
to
100
.
11.
The handsets do not support dynamic power and will not utilize the
information element that is set when DTPC Support is enabled. The
handset power should be configured to match the highest transmit
power of the APs. Click the
Apply
button to save the settings.
12.
In the navigation pane under
802.11b/g/n,
select
EDCA Parameters.
13.
Select
SpectraLink
Voice
Priority
from the drop-down list.
14.
Click the
Apply
button to save the settings.
15.
In the navigation pane under
802.11b/g/n,
select
Network.
16.
Enable
802.11b/g Network Status
and
802.11g Support
if SpectraLink
Wireless Telephones are configured for 802.11b & b/g mixed mode.
17.
Click the
Apply
button to save the settings.