Cisco 1230AG Configuration Guide - Page 26

Controller Setup

Get Cisco 1230AG - Aironet - Wireless Access Point PDF manuals and user guides View all Cisco 1230AG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

VIEW Certified Configuration Guide 12. Reboot the Controller. Controller Setup The initial setup of the controller is shown below. The setup instructions outlined in this document are for the configuration shown in the diagram only. Your configuration may differ, and the appropriate adjustments must be made. It is not necessary to configure each AP individually. The WLC is capable of provisioning the APs. 1. From the main menu, click Controller. 2. Set the Ethernet Multicast Mode to Multicast and enter a multicast IP address that is currently not being used on your network for the Multicast Group Address. 3. Click the Apply button. 4. Click Save Configuration. 26 PN: 1725-36192-001_H

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
VIEW Certified Configuration Guide
PN: 1725-36192-001_H
26
12.
Reboot the Controller.
Controller Setup
The initial setup of the controller is shown below.
The setup instructions outlined in this document are for the
configuration shown in the diagram only. Your configuration may
differ, and the appropriate adjustments must be made.
It is not necessary to configure each AP individually. The WLC is
capable of provisioning the APs.
1.
From the main menu, click
Controller
.
2.
Set the
Ethernet
Multicast
Mode
to
Multicast
and enter a multicast IP
address that is currently not being used on your network for the
Multicast
Group
Address
.
3.
Click the
Apply
button.
4.
Click
Save Configuration
.