Cisco 8540 User Guide - Page 51
DC Power Supply Specifications, Description, Specifications
View all Cisco 8540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Appendix A Chassis and Power Supply Specifications Table A-1 Chassis and Power Supply Specifications (continued) Description Specifications DC Power Supply Specifications DC total output 1360W maximum DC voltage Typical range (U.S. and Canada) Typical range (international) -48 to -60 VDC continuous -48 VDC (nominal) -56 VDC (high) -42 VDC (low) -60 VDC (nominal) -72 VDC (high) -52 VDC (low) Power supply load 1360W maximum, 1000W typical with maximum configuration Maximum dissipated power at -48VDC 1/2A DC current Rated 40A Maximum power draw: 43A @ 42 VDC, 38A @ 48 VDC, 30A @ 60 VDC with chassis fully configured Heat dissipation 1800 W (6140 Btu/hr) DC voltages supplied and steady-state maximum current ratings +3V3 @ 15.0A +5V @ 5.0A +12V @ 6.0A +42V @ 28.84A DC wire gauge for power cable 816 AWG17, 90° , copper conductor (recommended18) 1. lfm = linear feet per minute. 2. UL = Underwriters Laboratories. 3. CSA = Canadian Standards Association. 4. EN = European Norm. 5. IEC = International Electrotechnical Commission. 6. TS = Technical Standard. 7. AS/NZS = Australian/New Zealand Standard. 8. EMI = electromagnetic interference. 9. LightStream 1010 port adapters installed in a Catalyst 8540 MSR chassis may not be EMI compliant. An EMI strip ships with the chassis for installation on the port adapters to meet EMI compliance. 10. FCC = Federal Communications Commission. 78-6134-03 Catalyst 8540 Chassis Installation Guide A-3