Cisco ASR1000-RP2 Software Guide - Page 144
Step 9, Upgrade the RPAccess, RPIOS, and RPControl
View all Cisco ASR1000-RP2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Upgrade Process With Service Impact for Nonredundant Platforms Chapter 4 Software Upgrade Process Step 9 Command or Action issu loadversion rp 0 file file-system:asr1001-{rpaccess,rpios,rpcontrol}*versio n-string*.pkg bay standby-bay force Purpose Upgrade the RPAccess, RPIOS, and RPControl subpackages in the standby bay. Example: Router# issu loadversion rp 0 file bootflash:asr1001-{rpaccess,rpios,rpcontrol}*03.02. 01.S.151-1.S1_2*.pkg bay 1 force Step 10 issu commitversion Example: Once the SSO state is reached, commit the software version. Router# issu commitversion Step 11 redundancy force-switchover Example: Router# redundancy force-switchover Force a switchover from the active IOS process to the standby IOS process. Note Your connection to the router often drops and is expected behavior at this point of the procedure in many scenarios. If this step drops your connection to the router, wait a few minutes before reconnecting to the router and then continue to Step 12. Step 12 show platform Example: (Optional) Monitor system state to ensure both IOS processes are active. Router# show platform Step 13 issu loadversion rp 0 file Upgrade the RPAccess, RPIOS, and RPControl file-system:asr1001-{rpaccess,rpios,rpcontrol}*vers subpackages in the standby bay (a different bay than in ion-string*.pkg bay standby-bay force Step 9). Example: Router# issu loadversion rp 0 file bootflash:asr1001-{rpaccess,rpios,rpcontrol}*03.02. 01.S.151-1.S1_2*.pkg bay 0 force Step 14 issu commitversion Commit the software version. Example: Router# issu commitversion 4-82 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10