Cisco ASR1000-RP2 Software Guide - Page 346
Configuring the Router to Boot the Consolidated Package on the TFTP Server, Appendix B
View all Cisco ASR1000-RP2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 346 highlights
Configuring the Router to Boot the Consolidated Package on the TFTP Server Appendix B Configuration Examples boot system tftp://172.17.16.81/auto/tftp-users/user/asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bi n boot-end-marker Router# copy run start Destination filename [startup-config]? Building configuration... [OK] Router# reload Proceed with reload? [confirm] *May 29 21:52:01.500: %SYS-5-RELOAD: Reload requested by user on console. Reload Reason: Reload command. System Bootstrap, Version 12.2(33r)XN2, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 2008 by cisco Systems, Inc. Current image running: Boot ROM0 Last reset cause: LocalSoft ASR1000-RP1 platform with 4194303 Kbytes of main memory IP_ADDRESS: 172.17.52.155 IP_SUBNET_MASK: 255.255.255.0 DEFAULT_GATEWAY: 172.17.52.1 TFTP_SERVER: 172.17.16.81 TFTP_FILE: auto/tftp-users/user/asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin Using midplane macaddr TFTP_MACADDR: 00:1a:30:46:e3:ff TFTP_VERBOSE: Progress TFTP_RETRY_COUNT: 18 TFTP_TIMEOUT: 7200 TFTP_CHECKSUM: Yes ETHER_PORT: 3 ETHER_SPEED_MODE: Auto Detect link up 100Mbps/HD Receiving auto/tftp-users/user/asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin from 172.17.16.81 File reception completed. Boot image size = 208904396 (0xc73a0cc) bytes Using midplane macaddr Package header rev 0 structure detected Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-2 OL-16506-10