Cisco ASR1000-RP2 Software Guide - Page 254
Alert Group, Call Home, Trigger Event, Syslog Event, Severity, Description and CLI Commands, Executed
View all Cisco ASR1000-RP2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 254 highlights
Alert Group Trigger Events and Commands Chapter 7 Configuring Call Home Table 7-3 Alert Group Inventory - - - - Call Home Alert Groups, Events, and Actions (continued) Call Home Trigger Event - Syslog Event %ASR1000_PEM-3-FANFAIL - %ASR1000_PEM-6-FANOK Description and CLI Commands Severity Executed 3 The fan in slot (slot/subslot number) is encountering a failure condition. 6 The fan in slot (slot/subslot number) is functioning properly. - %ASR1000_PEM-3-PEMFAIL 3 The PEM in slot (slot number) is switched off or encountering a failure condition. - %ASR1000_PEM-6-PEMOK 6 The PEM in slot (slot number) is functioning properly. - ENVM - - %ENVIRONMENTAL-1-ALERT 1 %ENVIRONMENTAL-1-SENSORFAIL 1 %ENVIRONMENTAL-1-SENSOROK 1 - - SPA %ASR1000_OIR-6-REMSPA 6 HARDWARE_ REMOVAL SPA %ASR1000_OIR-6-INSSPA 6 HARDWARE_I NSERTION CC/FP/RP %ASR1000_OIR-6-REMCARD 6 HARDWARE_ REMOVAL CC/FP/RP %ASR1000_OIR-6-INSCARD 6 HARDWARE_I NSERTION Any sensor in fp/cc/rp has exceeded a certain threshold and resulted in this environmental alert. Any sensor in fp/cc/rp has failed and resulted in this environmental alert. Any sensor in fp/cc/rp has recovered and resulted in this environmental alert. Inventory status should be provided whenever a unit is cold-booted, or when FRUs are inserted or removed. This is considered a noncritical event, and the information is used for status and entitlement. (Sent to TAC.) CLI commands executed: show platform show inventory oid show version show diag all eeprom detail SPA removed from subslot (slot/subslot number) and the interfaces are disabled. SPA inserted in subslot (slot/subslot number). Card (cc/rp/fp) removed from slot (slot number). Card (cc/rp/fp) inserted in slot (slot number). 7-38 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10